HL7 FHIR Implementation Guide Laboratory Report
0.2.0 - trial-use IT

HL7 FHIR Implementation Guide Laboratory Report - Local Development build (v0.2.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: ObservationDocRefertoLabIt - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 1

Definitions for the observation-doc-it-lab resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Observation
Definition

Measurements and simple assertions made about a patient, device or other subject.

ShortObservation Referto di LaboratorioMeasurements and simple assertions
Comments

Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesVital Signs, Measurement, Results, Tests
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
2. Observation.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Observation.extension:SupportingInfo
Slice NameSupportingInfo
Definition

Other resources from the patient record that may be relevant to the event. The information from these resources was either used to create the instance or is provided to help with its interpretation. This extension should not be used if more specific inline elements or extensions are available. For example, use Observation.hasMember instead of supportingInformation for representing the members of an Observation panel.

ShortOther information that may be relevant to this event.
Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(Supporting info) (Extension Type: Reference(Resource))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Observation.extension:TriggeredBy
Slice NameTriggeredBy
Definition

R5: Observation.triggeredBy (new:BackboneElement)

ShortR5: Triggering observation(s) (new)
Comments

Element Observation.triggeredBy has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.triggeredBy has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(R5: Triggering observation(s) (new)) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Observation.extension:BodyStructure
Slice NameBodyStructure
Definition

R5: Observation.bodyStructure (new:Reference(BodyStructure))

ShortR5: Observed body structure (new)
Comments

Element Observation.bodyStructure has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.bodyStructure has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Only used if not implicit in code found in Observation.code or bodySite is used. In many systems, this may be represented as a related observation instead of an inline component.

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: Observed body structure (new)) (Extension Type: Reference(Cross-version Profile for R5.BodyStructure for use in FHIR R4, BodyStructure))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Observation.extension:ValueR5
Slice NameValueR5
Definition

R5: Observation.value[x] additional types (Attachment, Reference(http://hl7.org/fhir/StructureDefinition/MolecularSequence))

ShortR5: value additional types
Comments

Element Observation.value[x] is mapped to FHIR R4 element Observation.value[x] as SourceIsBroaderThanTarget. The mappings for Observation.value[x] do not cover the following types: Attachment, Reference. The target context Observation.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Observation.

  • An observation may have:
    1. a single value here
    2. both a value and a set of related or component values
    3. only a set of related or component values.
  • If a value is present, the datatype for this element should be determined by the code.
  • CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the code defines a coded value.
  • Attachment is used if the observation result value is a binary file such as an image. If the observation result value is derived from the binary file (for example 'X' detected and here is the the proof in this image), the binary file may be directly represented using DocumentReference and referenced by derivedFrom.
  • The usage of valueReference is restricted to the MolecularSequence resource when used as a definitional resource, not as a patient-specific finding. .
  • For additional guidance, see the Notes section below.
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(R5: value additional types) (Extension Type: Choice of: Attachment, Reference(Cross-version Profile for R5.MolecularSequence for use in FHIR R4, MolecularSequence))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Observation.extension:LabTestKit
Slice NameLabTestKit
Definition

This extension links this observation with the laboratory test kit used for this test. Usually only one laboratory test kit is referred

ShortDevice Laboratory Test Kit
Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(Device Laboratory Test Kit) (Extension Type: Reference(Device))
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Observation.extension:LabTestKit.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Observation.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 16. Observation.extension:LabTestKit.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    Fixed Valuehttp://hl7.eu/fhir/laboratory/StructureDefinition/observation-deviceLabTestKit
    18. Observation.extension:CertifiedRefMaterialCodeable
    Slice NameCertifiedRefMaterialCodeable
    Definition

    This extension links this observation with the certified reference material used for the calibration. The certified reference material is identified by using a CodeableConcept. This extension should be used when the unit is UCUM [IU].

    ShortCertified Reference Material: CodeableConcept
    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(Certified Reference Material: CodeableConcept) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    20. Observation.extension:CertifiedRefMaterialIdentifer
    Slice NameCertifiedRefMaterialIdentifer
    Definition

    This extension links this observation with the certified reference material used for the calibration. The certified reference material is identified by using an Identifier. This extension should be used when the unit is UCUM [IU].

    ShortCertified Reference Material: Identifier
    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(Certified Reference Material: Identifier) (Extension Type: Identifier)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    22. Observation.extension:Labaccredited
    Slice NameLabaccredited
    Definition

    Simple accreditation extension. For Observation it indicates that the laboratory test was/is accredited. For ServiceRequest it indicates that the request shall be fulfilled by an accredited laboratory.

    ShortIndica se il laboratorio è accreditato o meno.
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(Laboratory Accredited) (Extension Type: boolean)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    24. Observation.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    26. Observation.status
    Definition

    The status of the result value.

    ShortDescrizione attributo: Stato dell'osservazione. Possibili valori: registered | preliminary | final | amended +registered | preliminary | final | amended +
    Comments

    This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from Observation status codehttp://hl7.org/fhir/ValueSet/observation-status|4.0.1
    (required to http://hl7.it/fhir/lab-report/ValueSet/valueset-status-obs-it)
    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to track the status of individual results. Some results are finalized before the whole report is finalized.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. Observation.category
    Definition

    A code that classifies this laboratory report. Two basic categories has been selected in this guide: laboratory specialty and Study type. Laboratory specialty is characteristic of the laboratory that produced the test result while Study type is an arbitrary classificion of the test type.


    A code that classifies the general type of observation being made.

    ShortClassification of type of observation
    Comments

    In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

    Control10..*
    BindingThe codes SHOULD be taken from ObservationCategoryCodeshttp://hl7.org/fhir/ValueSet/observation-category|4.0.1
    (preferred to http://hl7.org/fhir/ValueSet/observation-category|4.0.1)

    Codes for high level observation categories.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Used for filtering what observations are retrieved and displayed.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Observation.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • pattern @ $this
    • 30. Observation.category:laboratory
      Slice Namelaboratory
      Definition

      A code that classifies the general type of observation being made.

      Short Indica genericamente che si riferisce ad un esame di LaboratorioClassification of type of observation
      Comments

      In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

      Control10..1*
      BindingThe codes SHALL be taken from The codes SHOULD be taken from ObservationCategoryCodeshttp://hl7.org/fhir/ValueSet/observation-category|4.0.1
      (required to http://hl7.org/fhir/ValueSet/observation-category)
      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Used for filtering what observations are retrieved and displayed.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. Observation.category:studyType
      Slice NamestudyType
      Definition

      A code that classifies the general type of observation being made.

      ShortClassificazione per tipo di studioClassification of type of observation
      Comments

      In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

      Control0..*
      BindingThe codes SHALL be taken from The codes SHOULD be taken from Laboratory Study Typeshttp://hl7.org/fhir/ValueSet/observation-category|4.0.1
      (required to http://hl7.eu/fhir/laboratory/ValueSet/lab-studyType-eu-lab)
      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Used for filtering what observations are retrieved and displayed.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. Observation.category:specialty
      Slice Namespecialty
      Definition

      A code that classifies the general type of observation being made.

      ShortClassificazione per specialitàClassification of type of observation
      Comments

      In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

      Control0..*
      BindingThe codes SHALL be taken from The codes SHOULD be taken from Laboratory Specialtyhttp://hl7.org/fhir/ValueSet/observation-category|4.0.1
      (required to http://hl7.eu/fhir/laboratory/ValueSet/lab-specialty-eu-lab)
      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Used for filtering what observations are retrieved and displayed.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      36. Observation.code
      Definition

      Describes what was observed. Sometimes this is called the observation "name".

      ShortTipo di osservazione tramite codice.Type of observation (code / type)
      Comments

      All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

      Control1..1
      BindingThe codes SHOULD be taken from For example codes, see Tipo Osservazionehttp://hl7.org/fhir/ValueSet/observation-codes|4.0.1
      (preferred to http://hl7.it/fhir/lab-report/ValueSet/risultato-osservazione)
      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Requirements

      Knowing what kind of observation is being made is essential to understanding the observation.

      Alternate NamesName
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      38. Observation.subject
      Definition

      The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the focus element or the code itself specifies the actual focus of the observation.

      ShortSoggetto della rilevazione clinica.Who and/or what the observation is about
      Comments

      One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated.

      Control10..1
      TypeReference(Patient - IG Core, Patient, Group, Device, Location)
      Is Modifierfalse
      Summarytrue
      Requirements

      Observations have no value if you don't know who or what they're about.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      40. Observation.effective[x]
      Definition

      The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

      ShortClinically relevant time/time-period for observation
      Comments

      At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

      Control10..1
      TypeChoice of: dateTime, Period, Timing, instant
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Knowing when an observation was deemed true is important to its relevance as well as determining trends.

      Alternate NamesOccurrence
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      42. Observation.effective[x].extension:dataAbsentReason
      Slice NamedataAbsentReason
      Definition

      Provides a reason why the expected value or elements in the element that is extended are missing.

      ShortMotivo per cui non è disponibile il valore di tempo relativo all'osservazione.
      Control0..1
      TypeExtension(Data Absent Reason) (Extension Type: code)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      44. Observation.performer
      Definition

      Who was responsible for asserting the observed value as "true".

      ShortSoggetto responsabile dell'osservazione.Who is responsible for the observation
      Control10..*
      TypeReference(Practitioner - IG Core, PractitionerRole - IG Core, Organization - IG Core, CareTeam, RelatedPerson, Practitioner, PractitionerRole, Organization, CareTeam, Patient, RelatedPerson)
      Is Modifierfalse
      Summarytrue
      Requirements

      May give a degree of confidence in the observation and also indicates where follow-up questions should be directed.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      46. Observation.performer.extension:performedFunction
      Slice NameperformedFunction
      Definition

      Distinguishes the type of involvement of the performer in the event. For example, 'author', 'verifier' or 'responsible party'.

      ShortRuolo del soggetto responsabile dell'osservazione.
      Control0..1
      TypeExtension(Performer function) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      48. Observation.value[x]
      Definition

      The information determined as a result of making the observation, if the information has a simple value.

      ShortRisultato dell'osservazione.Actual result
      Comments

      An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

      Control0..1
      This element is affected by the following invariants: obs-7
      TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Observation.value[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • type @ $this
      • 50. Observation.value[x]:valueQuantity
        Slice NamevalueQuantity
        Definition

        The information determined as a result of making the observation, if the information has a simple value.

        ShortRisultato misurabile tramite una quantità.Actual result
        Comments

        An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

        Control0..1
        This element is affected by the following invariants: obs-7
        TypeQuantity(Quantity - Lab Report), dateTime, boolean, string, SampledData, Period, Ratio, integer, time, Range, CodeableConcept
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summarytrue
        Requirements

        An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        52. Observation.value[x]:valueRatio
        Slice NamevalueRatio
        Definition

        The information determined as a result of making the observation, if the information has a simple value.

        ShortRapporto di misura.Actual result
        Comments

        An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

        Control0..1
        This element is affected by the following invariants: obs-7
        TypeRatio(Ratio - Lab Report), dateTime, boolean, string, SampledData, Quantity, Period, integer, time, Range, CodeableConcept
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summarytrue
        Requirements

        An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        54. Observation.value[x]:valueRange
        Slice NamevalueRange
        Definition

        The information determined as a result of making the observation, if the information has a simple value.

        ShortIntervallo di misura.Actual result
        Comments

        An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

        Control0..1
        This element is affected by the following invariants: obs-7
        TypeRange(Range - Lab Report), dateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, time, CodeableConcept
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summarytrue
        Requirements

        An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        56. Observation.value[x]:valueCodeableConcept
        Slice NamevalueCodeableConcept
        Definition

        The information determined as a result of making the observation, if the information has a simple value.

        ShortActual result
        Comments

        An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

        Control0..1
        This element is affected by the following invariants: obs-7
        BindingThe codes SHOULD be taken from For codes, see Risultato osservazione codificato
        (preferred to http://hl7.it/fhir/lab-report/ValueSet/valueset-valuecodeableconcept-obs-it)
        TypeCodeableConcept, dateTime, boolean, string, SampledData, Quantity, Period, Ratio, integer, time, Range
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Summarytrue
        Requirements

        An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        Guidance on how to interpret the contents of this table can be foundhere

        0. Observation
        2. Observation.status
        BindingThe codes SHALL be taken from Observation status code
        (required to http://hl7.it/fhir/lab-report/ValueSet/valueset-status-obs-it)

        Guidance on how to interpret the contents of this table can be foundhere

        0. Observation
        Definition

        Measurements and simple assertions made about a patient, device or other subject.

        ShortObservation Referto di Laboratorio
        Comments

        Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

        Control0..*
        Is Modifierfalse
        Summaryfalse
        Alternate NamesVital Signs, Measurement, Results, Tests
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
        obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
        2. Observation.id
        Definition

        The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

        ShortLogical id of this artifact
        Comments

        The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

        Control0..1
        Typeid
        Is Modifierfalse
        Summarytrue
        4. Observation.meta
        Definition

        The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

        ShortMetadata about the resource
        Control0..1
        TypeMeta
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        6. Observation.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        8. Observation.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingThe codes SHOULD be taken from CommonLanguages
        (preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

        A human language.

        Additional BindingsPurpose
        AllLanguagesMax Binding
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        10. Observation.text
        Definition

        A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortText summary of the resource, for human interpretation
        Comments

        Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        TypeNarrative
        Is Modifierfalse
        Summaryfalse
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. Observation.contained
        Definition

        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

        ShortContained, inline Resources
        Comments

        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

        Control0..*
        TypeResource
        Is Modifierfalse
        Summaryfalse
        Alternate Namesinline resources, anonymous resources, contained resources
        14. Observation.extension
        Definition

        An Extension

        ShortExtension
        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Observation.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 16. Observation.extension:SupportingInfo
          Slice NameSupportingInfo
          Definition

          Other resources from the patient record that may be relevant to the event. The information from these resources was either used to create the instance or is provided to help with its interpretation. This extension should not be used if more specific inline elements or extensions are available. For example, use Observation.hasMember instead of supportingInformation for representing the members of an Observation panel.

          ShortOther information that may be relevant to this event.
          Control0..*
          This element is affected by the following invariants: ele-1
          TypeExtension(Supporting info) (Extension Type: Reference(Resource))
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          18. Observation.extension:TriggeredBy
          Slice NameTriggeredBy
          Definition

          R5: Observation.triggeredBy (new:BackboneElement)

          ShortR5: Triggering observation(s) (new)
          Comments

          Element Observation.triggeredBy has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.triggeredBy has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

          Control0..*
          This element is affected by the following invariants: ele-1
          TypeExtension(R5: Triggering observation(s) (new)) (Complex Extension)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          20. Observation.extension:BodyStructure
          Slice NameBodyStructure
          Definition

          R5: Observation.bodyStructure (new:Reference(BodyStructure))

          ShortR5: Observed body structure (new)
          Comments

          Element Observation.bodyStructure has a context of Observation based on following the parent source element upwards and mapping to Observation. Element Observation.bodyStructure has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Only used if not implicit in code found in Observation.code or bodySite is used. In many systems, this may be represented as a related observation instead of an inline component.

          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(R5: Observed body structure (new)) (Extension Type: Reference(Cross-version Profile for R5.BodyStructure for use in FHIR R4, BodyStructure))
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          22. Observation.extension:ValueR5
          Slice NameValueR5
          Definition

          R5: Observation.value[x] additional types (Attachment, Reference(http://hl7.org/fhir/StructureDefinition/MolecularSequence))

          ShortR5: value additional types
          Comments

          Element Observation.value[x] is mapped to FHIR R4 element Observation.value[x] as SourceIsBroaderThanTarget. The mappings for Observation.value[x] do not cover the following types: Attachment, Reference. The target context Observation.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Observation.

          • An observation may have:
            1. a single value here
            2. both a value and a set of related or component values
            3. only a set of related or component values.
          • If a value is present, the datatype for this element should be determined by the code.
          • CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the code defines a coded value.
          • Attachment is used if the observation result value is a binary file such as an image. If the observation result value is derived from the binary file (for example 'X' detected and here is the the proof in this image), the binary file may be directly represented using DocumentReference and referenced by derivedFrom.
          • The usage of valueReference is restricted to the MolecularSequence resource when used as a definitional resource, not as a patient-specific finding. .
          • For additional guidance, see the Notes section below.
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(R5: value additional types) (Extension Type: Choice of: Attachment, Reference(Cross-version Profile for R5.MolecularSequence for use in FHIR R4, MolecularSequence))
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          24. Observation.extension:LabTestKit
          Slice NameLabTestKit
          Definition

          This extension links this observation with the laboratory test kit used for this test. Usually only one laboratory test kit is referred

          ShortDevice Laboratory Test Kit
          Control0..*
          This element is affected by the following invariants: ele-1
          TypeExtension(Device Laboratory Test Kit) (Extension Type: Reference(Device))
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          26. Observation.extension:LabTestKit.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          28. Observation.extension:LabTestKit.extension
          Definition

          An Extension

          ShortExtension
          Control0..0
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Observation.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 30. Observation.extension:LabTestKit.url
            Definition

            Source of the definition for the extension code - a logical name or a URL.

            Shortidentifies the meaning of the extension
            Comments

            The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

            Control1..1
            Typeuri
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            Fixed Valuehttp://hl7.eu/fhir/laboratory/StructureDefinition/observation-deviceLabTestKit
            32. Observation.extension:LabTestKit.value[x]
            Definition

            Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

            ShortValue of extension
            Control0..1
            TypeReference(Device - Lab Report)
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            34. Observation.extension:CertifiedRefMaterialCodeable
            Slice NameCertifiedRefMaterialCodeable
            Definition

            This extension links this observation with the certified reference material used for the calibration. The certified reference material is identified by using a CodeableConcept. This extension should be used when the unit is UCUM [IU].

            ShortCertified Reference Material: CodeableConcept
            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(Certified Reference Material: CodeableConcept) (Extension Type: CodeableConcept)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            36. Observation.extension:CertifiedRefMaterialIdentifer
            Slice NameCertifiedRefMaterialIdentifer
            Definition

            This extension links this observation with the certified reference material used for the calibration. The certified reference material is identified by using an Identifier. This extension should be used when the unit is UCUM [IU].

            ShortCertified Reference Material: Identifier
            Control0..*
            This element is affected by the following invariants: ele-1
            TypeExtension(Certified Reference Material: Identifier) (Extension Type: Identifier)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            38. Observation.extension:Labaccredited
            Slice NameLabaccredited
            Definition

            Simple accreditation extension. For Observation it indicates that the laboratory test was/is accredited. For ServiceRequest it indicates that the request shall be fulfilled by an accredited laboratory.

            ShortIndica se il laboratorio è accreditato o meno.
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(Laboratory Accredited) (Extension Type: boolean)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            40. Observation.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
            Summaryfalse
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            42. Observation.identifier
            Definition

            A unique identifier assigned to this observation.

            ShortBusiness Identifier for observation
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..*
            TypeIdentifier
            Is Modifierfalse
            Summarytrue
            Requirements

            Allows observations to be distinguished and referenced.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            44. Observation.basedOn
            Definition

            A plan, proposal or order that is fulfilled in whole or in part by this event. For example, a MedicationRequest may require a patient to have laboratory test performed before it is dispensed.

            ShortFulfills plan, proposal or order
            Control0..*
            TypeReference(CarePlan, DeviceRequest, ImmunizationRecommendation, MedicationRequest, NutritionOrder, ServiceRequest - Lab Report)
            Is Modifierfalse
            Summarytrue
            Requirements

            Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon.

            Alternate NamesFulfills
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            46. Observation.partOf
            Definition

            A larger event of which this particular Observation is a component or step. For example, an observation as part of a procedure.

            ShortPart of referenced event
            Comments

            To link an Observation to an Encounter use encounter. See the Notes below for guidance on referencing another Observation.

            Control0..*
            TypeReference(MedicationAdministration, MedicationDispense, MedicationStatement, Procedure, Immunization, ImagingStudy)
            Is Modifierfalse
            Summarytrue
            Alternate NamesContainer
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            48. Observation.status
            Definition

            The status of the result value.

            ShortDescrizione attributo: Stato dell'osservazione. Possibili valori: registered | preliminary | final | amended +
            Comments

            This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

            Control1..1
            BindingThe codes SHALL be taken from Observation status code
            (required to http://hl7.it/fhir/lab-report/ValueSet/valueset-status-obs-it)
            Typecode
            Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Need to track the status of individual results. Some results are finalized before the whole report is finalized.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            50. Observation.category
            Definition

            A code that classifies this laboratory report. Two basic categories has been selected in this guide: laboratory specialty and Study type. Laboratory specialty is characteristic of the laboratory that produced the test result while Study type is an arbitrary classificion of the test type.

            ShortClassification of type of observation
            Comments

            In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

            Control1..*
            BindingThe codes SHOULD be taken from ObservationCategoryCodes
            (preferred to http://hl7.org/fhir/ValueSet/observation-category|4.0.1)

            Codes for high level observation categories.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Requirements

            Used for filtering what observations are retrieved and displayed.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on Observation.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • pattern @ $this
            • 52. Observation.category:laboratory
              Slice Namelaboratory
              Definition

              A code that classifies the general type of observation being made.

              Short Indica genericamente che si riferisce ad un esame di Laboratorio
              Comments

              In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

              Control1..1
              BindingThe codes SHALL be taken from ObservationCategoryCodes
              (required to http://hl7.org/fhir/ValueSet/observation-category)
              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              Used for filtering what observations are retrieved and displayed.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              54. Observation.category:studyType
              Slice NamestudyType
              Definition

              A code that classifies the general type of observation being made.

              ShortClassificazione per tipo di studio
              Comments

              In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

              Control0..*
              BindingThe codes SHALL be taken from Laboratory Study Types
              (required to http://hl7.eu/fhir/laboratory/ValueSet/lab-studyType-eu-lab)
              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              Used for filtering what observations are retrieved and displayed.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              56. Observation.category:specialty
              Slice Namespecialty
              Definition

              A code that classifies the general type of observation being made.

              ShortClassificazione per specialità
              Comments

              In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

              Control0..*
              BindingThe codes SHALL be taken from Laboratory Specialty
              (required to http://hl7.eu/fhir/laboratory/ValueSet/lab-specialty-eu-lab)
              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              Used for filtering what observations are retrieved and displayed.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              58. Observation.code
              Definition

              Describes what was observed. Sometimes this is called the observation "name".

              ShortTipo di osservazione tramite codice.
              Comments

              All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

              Control1..1
              BindingThe codes SHOULD be taken from Tipo Osservazione
              (preferred to http://hl7.it/fhir/lab-report/ValueSet/risultato-osservazione)
              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              Knowing what kind of observation is being made is essential to understanding the observation.

              Alternate NamesName
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              60. Observation.subject
              Definition

              The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the focus element or the code itself specifies the actual focus of the observation.

              ShortSoggetto della rilevazione clinica.
              Comments

              One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated.

              Control1..1
              TypeReference(Patient - IG Core)
              Is Modifierfalse
              Summarytrue
              Requirements

              Observations have no value if you don't know who or what they're about.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              62. Observation.focus
              Definition

              The actual focus of an observation when it is not the patient of record representing something or someone associated with the patient such as a spouse, parent, fetus, or donor. For example, fetus observations in a mother's record. The focus of an observation could also be an existing condition, an intervention, the subject's diet, another observation of the subject, or a body structure such as tumor or implanted device. An example use case would be using the Observation resource to capture whether the mother is trained to change her child's tracheostomy tube. In this example, the child is the patient of record and the mother is the focus.

              ShortWhat the observation is about, when it is not about the subject of record
              Comments

              Typically, an observation is made about the subject - a patient, or group of patients, location, or device - and the distinction between the subject and what is directly measured for an observation is specified in the observation code itself ( e.g., "Blood Glucose") and does not need to be represented separately using this element. Use specimen if a reference to a specimen is required. If a code is required instead of a resource use either bodysite for bodysites or the standard extension focusCode.

              Control0..*
              TypeReference(Resource)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              64. Observation.encounter
              Definition

              The healthcare event (e.g. a patient and healthcare provider interaction) during which this observation is made.

              ShortContesto in cui è stata prodotta l'osservazione.
              Comments

              This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests).

              Control0..1
              TypeReference(Encounter - Lab Report)
              Is Modifierfalse
              Summarytrue
              Requirements

              For some observations it may be important to know the link between an observation and a particular encounter.

              Alternate NamesContext
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              66. Observation.effective[x]
              Definition

              The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

              ShortClinically relevant time/time-period for observation
              Comments

              At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

              Control1..1
              TypeChoice of: dateTime, Period, Timing, instant
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Knowing when an observation was deemed true is important to its relevance as well as determining trends.

              Alternate NamesOccurrence
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              68. Observation.effective[x].id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              70. Observation.effective[x].extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Observation.effective[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 72. Observation.effective[x].extension:dataAbsentReason
                Slice NamedataAbsentReason
                Definition

                Provides a reason why the expected value or elements in the element that is extended are missing.

                ShortMotivo per cui non è disponibile il valore di tempo relativo all'osservazione.
                Control0..1
                TypeExtension(Data Absent Reason) (Extension Type: code)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                74. Observation.issued
                Definition

                The date and time this version of the observation was made available to providers, typically after the results have been reviewed and verified.

                ShortDate/Time this version was made available
                Comments

                For Observations that don’t require review and verification, it may be the same as the lastUpdated time of the resource itself. For Observations that do require review and verification for certain updates, it might not be the same as the lastUpdated time of the resource itself due to a non-clinically significant update that doesn’t require the new version to be reviewed and verified again.

                Control0..1
                Typeinstant
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                76. Observation.performer
                Definition

                Who was responsible for asserting the observed value as "true".

                ShortSoggetto responsabile dell'osservazione.
                Control1..*
                TypeReference(Practitioner - IG Core, PractitionerRole - IG Core, Organization - IG Core, CareTeam, RelatedPerson)
                Is Modifierfalse
                Summarytrue
                Requirements

                May give a degree of confidence in the observation and also indicates where follow-up questions should be directed.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                78. Observation.performer.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                80. Observation.performer.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Observation.performer.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 82. Observation.performer.extension:performedFunction
                  Slice NameperformedFunction
                  Definition

                  Distinguishes the type of involvement of the performer in the event. For example, 'author', 'verifier' or 'responsible party'.

                  ShortRuolo del soggetto responsabile dell'osservazione.
                  Control0..1
                  TypeExtension(Performer function) (Extension Type: CodeableConcept)
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  84. Observation.performer.reference
                  Definition

                  A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                  ShortLiteral reference, Relative, internal or absolute URL
                  Comments

                  Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                  Control0..1
                  This element is affected by the following invariants: ref-1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  86. Observation.performer.type
                  Definition

                  The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                  The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                  ShortType the reference refers to (e.g. "Patient")
                  Comments

                  This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                  Control0..1
                  BindingUnless not suitable, these codes SHALL be taken from ResourceType
                  (extensible to http://hl7.org/fhir/ValueSet/resource-types|4.0.1)

                  Aa resource (or, for logical models, the URI of the logical model).

                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  88. Observation.performer.identifier
                  Definition

                  An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                  ShortLogical reference, when literal reference is not known
                  Comments

                  When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                  When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                  Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..1
                  TypeIdentifier
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  90. Observation.performer.display
                  Definition

                  Plain text narrative that identifies the resource in addition to the resource reference.

                  ShortText alternative for the resource
                  Comments

                  This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  92. Observation.value[x]
                  Definition

                  The information determined as a result of making the observation, if the information has a simple value.

                  ShortRisultato dell'osservazione.
                  Comments

                  An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                  Control0..1
                  This element is affected by the following invariants: obs-7
                  TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
                  [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on Observation.value[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • type @ $this
                  • 94. Observation.value[x]:valueQuantity
                    Slice NamevalueQuantity
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    ShortRisultato misurabile tramite una quantità.
                    Comments

                    An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                    Control0..1
                    This element is affected by the following invariants: obs-7
                    TypeQuantity(Quantity - Lab Report)
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    96. Observation.value[x]:valueRatio
                    Slice NamevalueRatio
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    ShortRapporto di misura.
                    Comments

                    An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                    Control0..1
                    This element is affected by the following invariants: obs-7
                    TypeRatio(Ratio - Lab Report)
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    98. Observation.value[x]:valueRange
                    Slice NamevalueRange
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    ShortIntervallo di misura.
                    Comments

                    An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                    Control0..1
                    This element is affected by the following invariants: obs-7
                    TypeRange(Range - Lab Report)
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    100. Observation.value[x]:valueCodeableConcept
                    Slice NamevalueCodeableConcept
                    Definition

                    The information determined as a result of making the observation, if the information has a simple value.

                    ShortActual result
                    Comments

                    An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                    Control0..1
                    This element is affected by the following invariants: obs-7
                    BindingThe codes SHOULD be taken from Risultato osservazione codificato
                    (preferred to http://hl7.it/fhir/lab-report/ValueSet/valueset-valuecodeableconcept-obs-it)
                    TypeCodeableConcept
                    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    102. Observation.dataAbsentReason
                    Definition

                    Provides a reason why the expected value in the element Observation.value[x] is missing.

                    ShortWhy the result is missing
                    Comments

                    Null or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "specimen unsatisfactory".

                    The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Note that an observation may only be reported if there are values to report. For example differential cell counts values may be reported only when > 0. Because of these options, use-case agreements are required to interpret general observations for null or exceptional values.

                    Control0..1
                    This element is affected by the following invariants: obs-6
                    BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                    (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason|4.0.1)

                    Codes specifying why the result (Observation.value[x]) is missing.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For many results it is necessary to handle exceptional values in measurements.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    104. Observation.interpretation
                    Definition

                    A categorical assessment of an observation value. For example, high, low, normal.

                    ShortInterpretazione del risultato (Alto, Basso, Normale, ecc.)
                    Comments

                    Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                    Control0..*
                    BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                    (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation|4.0.1)

                    Codes identifying interpretations of observations.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                    Alternate NamesAbnormal Flag
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    106. Observation.note
                    Definition

                    Comments about the observation or the results.

                    ShortComments about the observation
                    Comments

                    May include general statements about the observation, or statements about significant, unexpected or unreliable results values, or information about its source when relevant to its interpretation.

                    Control0..*
                    TypeAnnotation
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Need to be able to provide free text additional information.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    108. Observation.bodySite
                    Definition

                    Indicates the site on the subject's body where the observation was made (i.e. the target site).

                    ShortSito corporeo dell'osservazione.
                    Comments

                    Only used if not implicit in code found in Observation.code. In many systems, this may be represented as a related observation instead of an inline component.

                    If the use case requires BodySite to be handled as a separate resource (e.g. to identify and track separately) then use the standard extension bodySite.

                    Control0..1
                    BindingFor example codes, see SNOMEDCTBodyStructures
                    (example to http://hl7.org/fhir/ValueSet/body-site|4.0.1)

                    Codes describing anatomical locations. May include laterality.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    110. Observation.method
                    Definition

                    Indicates the mechanism used to perform the observation.

                    ShortMetodo di rilevazione dell'osservazione.
                    Comments

                    Only used if not implicit in code for Observation.code.

                    Control0..1
                    BindingThe codes SHOULD be taken from ObservationMethods
                    (preferred to http://hl7.org/fhir/ValueSet/observation-methods)
                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    In some cases, method can impact results and is thus used for determining whether results can be compared or determining significance of results.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    112. Observation.specimen
                    Definition

                    The specimen that was used when this observation was made.

                    ShortReference al campione su cui si basa l'osservazione.
                    Comments

                    Should only be used if not implicit in code found in Observation.code. Observations are not made on specimens themselves; they are made on a subject, but in many cases by the means of a specimen. Note that although specimens are often involved, they are not always tracked and reported explicitly. Also note that observation resources may be used in contexts that track the specimen explicitly (e.g. Diagnostic Report).

                    Control0..1
                    TypeReference(Specimen - Lab Report)
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    114. Observation.device
                    Definition

                    The device used to generate the observation data.

                    ShortDispositivo utilizzato per ottenere l'osservazione.
                    Comments

                    Note that this is not meant to represent a device involved in the transmission of the result, e.g., a gateway. Such devices may be documented using the Provenance resource where relevant.

                    Control0..1
                    TypeReference(Device - Lab Report, DeviceMetric)
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    116. Observation.referenceRange
                    Definition

                    Guidance on how to interpret the value by comparison to a normal or recommended range. Multiple reference ranges are interpreted as an "OR". In other words, to represent two distinct target populations, two referenceRange elements would be used.

                    ShortRange di riferimento per la caratterizzazione dell'osservazione sulla base di un criterio. Esempio: Range di normalità per uomo adulto.
                    Comments

                    Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                    Control0..*
                    TypeBackboneElement
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    obs-3: Must have at least a low or a high or text (low.exists() or high.exists() or text.exists())
                    118. Observation.referenceRange.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    120. Observation.referenceRange.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    122. Observation.referenceRange.modifierExtension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                    ShortExtensions that cannot be ignored even if unrecognized
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                    Summarytrue
                    Requirements

                    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                    Alternate Namesextensions, user content, modifiers
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    124. Observation.referenceRange.low
                    Definition

                    The value of the low bound of the reference range. The low bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the low bound is omitted, it is assumed to be meaningless (e.g. reference range is <=2.3).

                    ShortLimite inferiore del range di riferimento, se rilevante.
                    Control0..1
                    This element is affected by the following invariants: obs-3
                    TypeQuantity(SimpleQuantity)
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    126. Observation.referenceRange.high
                    Definition

                    The value of the high bound of the reference range. The high bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the high bound is omitted, it is assumed to be meaningless (e.g. reference range is >= 2.3).

                    ShortLimite superiore del range di riferimento, se rilevante.
                    Control0..1
                    This element is affected by the following invariants: obs-3
                    TypeQuantity(SimpleQuantity)
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    128. Observation.referenceRange.type
                    Definition

                    Codes to indicate the what part of the targeted reference population it applies to. For example, the normal or therapeutic range.

                    ShortContesto del range di riferimento. Esempio: Un intervallo atteso in un individuo prima della pubertà.
                    Comments

                    This SHOULD be populated if there is more than one range. If this element is not present then the normal range is assumed.

                    Control0..1
                    BindingThe codes SHOULD be taken from ObservationReferenceRangeMeaningCodes
                    (preferred to http://hl7.org/fhir/ValueSet/referencerange-meaning|4.0.1)

                    Code for the meaning of a reference range.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Need to be able to say what kind of reference range this is - normal, recommended, therapeutic, etc., - for proper interpretation.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    130. Observation.referenceRange.appliesTo
                    Definition

                    Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race. Multiple appliesTo are interpreted as an "AND" of the target populations. For example, to represent a target population of African American females, both a code of female and a code for African American would be used.

                    ShortCategoria della popolazione a cui si applica il range di riferimento.
                    Comments

                    This SHOULD be populated if there is more than one range. If this element is not present then the normal population is assumed.

                    Control0..*
                    BindingFor example codes, see ObservationReferenceRangeAppliesToCodes
                    (example to http://hl7.org/fhir/ValueSet/referencerange-appliesto|4.0.1)

                    Codes identifying the population the reference range applies to.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Need to be able to identify the target population for proper interpretation.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    132. Observation.referenceRange.age
                    Definition

                    The age at which this reference range is applicable. This is a neonatal age (e.g. number of weeks at term) if the meaning says so.

                    ShortEtà a cui si applica, se rilevante.
                    Control0..1
                    TypeRange
                    Is Modifierfalse
                    Summaryfalse
                    Requirements

                    Some analytes vary greatly over age.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    134. Observation.referenceRange.text
                    Definition

                    Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of "Negative" or a list or table of "normals".

                    ShortNote testuali.
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    136. Observation.hasMember
                    Definition

                    This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group.

                    ShortOsservazioni correlate alla risorsa.
                    Comments

                    When using this element, an observation will typically have either a value or a set of related resources, although both may be present in some cases. For a discussion on the ways Observations can assembled in groups together, see Notes below. Note that a system may calculate results from QuestionnaireResponse into a final score and represent the score as an Observation.

                    Control0..*
                    TypeReference(Observation - Lab Report)
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    138. Observation.derivedFrom
                    Definition

                    The target resource that represents a measurement from which this observation value is derived. For example, a calculated anion gap or a fetal measurement based on an ultrasound image.

                    ShortReference dell'osservazione da cui deriva questo valore di osservazione. Ad esempio, un gap anionico calcolato o una misurazione fetale basata su un'immagine ecografica.
                    Comments

                    All the reference choices that are listed in this element can represent clinical observations and other measurements that may be the source for a derived value. The most common reference will be another Observation. For a discussion on the ways Observations can assembled in groups together, see Notes below.

                    Control0..*
                    TypeReference(Observation - Lab Report, Media - Lab Report)
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    140. Observation.component
                    Definition

                    Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

                    ShortComponent results
                    Comments

                    For a discussion on the ways Observations can be assembled in groups together see Notes below.

                    Control0..*
                    TypeBackboneElement
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    EHDSObservation.component

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    142. Observation.component.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    144. Observation.component.extension
                    Definition

                    An Extension

                    ShortExtension
                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Observation.component.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 146. Observation.component.extension:value-r5
                      Slice Namevalue-r5
                      Definition

                      When the result is a Diagram or Picture (Microbiology), then the Attachment data type should be used. In FHIR R4 this can be done by preadopting the R5 Observation.value[x] element using the cross-version extension.

                      Shortonly for Diagrams or Pictures
                      Comments

                      Element Observation.value[x] is mapped to FHIR R4 element Observation.value[x] as SourceIsBroaderThanTarget. The mappings for Observation.value[x] do not cover the following types: Attachment, Reference. The target context Observation.value[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element Observation.

                      • An observation may have:
                        1. a single value here
                        2. both a value and a set of related or component values
                        3. only a set of related or component values.
                      • If a value is present, the datatype for this element should be determined by the code.
                      • CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the code defines a coded value.
                      • Attachment is used if the observation result value is a binary file such as an image. If the observation result value is derived from the binary file (for example 'X' detected and here is the the proof in this image), the binary file may be directly represented using DocumentReference and referenced by derivedFrom.
                      • The usage of valueReference is restricted to the MolecularSequence resource when used as a definitional resource, not as a patient-specific finding. .
                      • For additional guidance, see the Notes section below.
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      TypeExtension(R5: value additional types) (Extension Type: Choice of: Attachment, Reference(Cross-version Profile for R5.MolecularSequence for use in FHIR R4, MolecularSequence))
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      148. Observation.component.extension:value-r5.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      150. Observation.component.extension:value-r5.extension
                      Definition

                      An Extension

                      ShortExtension
                      Control0..0
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Observation.component.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 152. Observation.component.extension:value-r5.url
                        Definition

                        Source of the definition for the extension code - a logical name or a URL.

                        Shortidentifies the meaning of the extension
                        Comments

                        The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                        Control1..1
                        Typeuri
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        Fixed Valuehttp://hl7.org/fhir/5.0/StructureDefinition/extension-Observation.value
                        154. Observation.component.extension:value-r5.value[x]
                        Definition

                        The information determined as a result of making the observation, if the information has a simple value.

                        ShortActual result
                        Comments
                        • An observation may have:
                          1. a single value here
                          2. both a value and a set of related or component values
                          3. only a set of related or component values.
                        • If a value is present, the datatype for this element should be determined by the code.
                        • CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the code defines a coded value.
                        • Attachment is used if the observation result value is a binary file such as an image. If the observation result value is derived from the binary file (for example 'X' detected and here is the the proof in this image), the binary file may be directly represented using DocumentReference and referenced by derivedFrom.
                        • The usage of valueReference is restricted to the MolecularSequence resource when used as a definitional resource, not as a patient-specific finding. .
                        • For additional guidance, see the Notes section below.
                        Control0..1
                        TypeChoice of: Attachment, Reference(MolecularSequence)
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        156. Observation.component.modifierExtension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                        ShortExtensions that cannot be ignored even if unrecognized
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                        Summarytrue
                        Requirements

                        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                        Alternate Namesextensions, user content, modifiers
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        158. Observation.component.code
                        Definition

                        Describes what was observed. Sometimes this is called the observation "code".

                        ShortType of component observation (code / type)
                        Comments

                        All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

                        Control1..1
                        BindingFor example codes, see LOINCCodes
                        (example to http://hl7.org/fhir/ValueSet/observation-codes|4.0.1)

                        Codes identifying names of simple observations.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Summarytrue
                        Requirements

                        Knowing what kind of observation is being made is essential to understanding the observation.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        160. Observation.component.value[x]
                        Definition

                        The information determined as a result of making the observation, if the information has a simple value.

                        ShortActual component result
                        Comments

                        Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                        Control0..1
                        TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
                        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        SlicingThis element introduces a set of slices on Observation.component.value[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • type @ $this
                        • 162. Observation.component.value[x]:valueQuantity
                          Slice NamevalueQuantity
                          Definition

                          The information determined as a result of making the observation, if the information has a simple value.

                          ShortRisultato misurabile tramite una quantità.
                          Comments

                          Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                          Control0..1
                          TypeQuantity(Quantity - Lab Report)
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          164. Observation.component.value[x]:valueRatio
                          Slice NamevalueRatio
                          Definition

                          The information determined as a result of making the observation, if the information has a simple value.

                          ShortRapporto di misura.
                          Comments

                          Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                          Control0..1
                          TypeRatio(Ratio - Lab Report)
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          166. Observation.component.value[x]:valueRange
                          Slice NamevalueRange
                          Definition

                          The information determined as a result of making the observation, if the information has a simple value.

                          ShortIntervallo di misura.
                          Comments

                          Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                          Control0..1
                          TypeRange(Range - Lab Report)
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          168. Observation.component.value[x]:valueCodeableConcept
                          Slice NamevalueCodeableConcept
                          Definition

                          The information determined as a result of making the observation, if the information has a simple value.

                          ShortActual component result
                          Comments

                          Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

                          Control0..1
                          BindingThe codes SHOULD be taken from Risultato osservazione codificato
                          (preferred to http://hl7.it/fhir/lab-report/ValueSet/valueset-valuecodeableconcept-obs-it)
                          TypeCodeableConcept
                          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          170. Observation.component.dataAbsentReason
                          Definition

                          Provides a reason why the expected value in the element Observation.component.value[x] is missing.

                          ShortWhy the component result is missing
                          Comments

                          "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

                          The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

                          Control0..1
                          This element is affected by the following invariants: obs-6
                          BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
                          (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason|4.0.1)

                          Codes specifying why the result (Observation.value[x]) is missing.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          For many results it is necessary to handle exceptional values in measurements.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          172. Observation.component.interpretation
                          Definition

                          A categorical assessment of an observation value. For example, high, low, normal.

                          ShortHigh, low, normal, etc.
                          Comments

                          Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

                          Control0..*
                          BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
                          (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation|4.0.1)

                          Codes identifying interpretations of observations.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

                          Alternate NamesAbnormal Flag
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          174. Observation.component.referenceRange
                          Definition

                          Guidance on how to interpret the value by comparison to a normal or recommended range.

                          ShortProvides guide for interpretation of component result
                          Comments

                          Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

                          Control0..*
                          TypeSeettp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
                          Is Modifierfalse
                          Summaryfalse
                          Requirements

                          Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))